Skip to main content
A Nanografi Nano Technology companyNanografi [email protected]
Sign in
Request analysis

Sample preparation and processing

Print Proofing and Ink/Coating Sample Preparation

Repeatable gravure and flexo print proofs and controlled-thickness ink, varnish and coating drawdowns prepared on a K Printing Proofer for evaluation.

In short

Repeatable gravure and flexo print proofs and controlled-thickness ink, varnish and coating drawdowns prepared on a K Printing Proofer for evaluation. The print proofing and sample preparation service uses an RK PrintCoat Instruments K Printing Proofer. Typical needs include comparing new ink formulations against a reference, substrate compatibility, curing and drying behaviour, batch consistency and colour samples for customer approval.

The print proofing and sample preparation service uses an RK PrintCoat Instruments K Printing Proofer. With a gravure cylinder or anilox/flexo plate at a defined ink transfer volume and controlled pressure and speed, it produces repeatable proofs for evaluating colour strength, opacity, dot gain, gloss and adhesion at laboratory scale before committing to a press. On the same platform, wire-wound (Meyer) bars prepare drawdowns of varnishes, coatings and functional inks (conductive, barrier, UV-curable) at controlled wet film thickness on paper, board, polymer films, aluminium foil and label stocks. Typical needs include comparing new ink formulations against a reference, substrate compatibility, curing and drying behaviour, batch consistency and colour samples for customer approval. It serves packaging, label, ink and coating manufacturers and printed electronics developers.

What you receive

  • Labelled print proofs or drawdown samples on the agreed substrates

  • Preparation record covering cylinder/plate specification, bar number, pressure, speed and drying/curing conditions

  • Side-by-side visual comparison set against the reference sample

  • Gloss, dry film thickness and adhesion evaluation on request

  • Sample preparation summary report (PDF)

How it works

  1. Request and scoping

    Ink or coating type, substrate, printing method (gravure/flexo/bar), target film thickness and number of samples are agreed with you.

  2. Sample reception and preparation

    Inks and substrates are logged and conditioned to laboratory ambient; viscosity is checked and the cylinder, plate or bar is selected and cleaned.

  3. Measurement

    Proofs are printed in replicate at the defined pressure and speed; samples are dried or cured under the specified conditions and labelled.

  4. Reporting

    Samples are delivered with the preparation record; visual and measured properties are compared with the reference and discussed with you on request.

Pricing

Available now

from

€370

per batch

excl. VAT (20%)

Lead time 7–15 business days

Final pricing depends on sample count, preparation and reporting scope. You receive an itemised proposal.

Prices are a guide and may change with any additional requests. Our team will contact you to confirm the scope and the final price.

Request this service

Describe your sample and the decision it supports. We reply with a technical proposal.

Request analysis

Instruments used

Print Proofer
RK PrintCoat Instruments K Printing Proofer

Questions

Frequently asked questions

How do I send samples for Print Proofing and Ink/Coating Sample Preparation?

Fill in the analysis request form. Our team replies with preparation and shipping instructions for your sample type, and we confirm together that the sample is suitable before you send it.

How long does Print Proofing and Ink/Coating Sample Preparation take?

It depends on the number of samples and laboratory workload. The estimated time on this page is a reference; once we review your request we share a firm schedule.

How is the price set?

The price on this page is a list price. It may change with the number of samples and any additional requests; after we agree the scope, the final price is shared in a proposal.

How do I receive the results?

Results are delivered as a written report. You can follow the status of your request in your account and through email notifications.

Can I request this from abroad?

Yes. We accept requests in Turkish, English, Arabic and Persian, and reply in the language you prefer.

Can I see your quality documents?

We develop our quality processes with reference to ISO/IEC 17025. For the current documents and scope details, contact us and we will send them in writing.

  • Analysis

    Rheology and Viscosity Analysis

    Rotational and oscillatory rheometry to determine flow curves, viscoelastic moduli, yield stress and thixotropy of liquids, gels, pastes and polymer melts.

  • Testing

    Gloss, Haze and Surface Appearance Testing

    Objective appearance evaluation of paint, coating, plastic and metal surfaces through 20°/60°/85° gloss, haze, DOI and RIQ measurements.

  • Testing

    Coating Thickness Testing

    Non-destructive thickness measurement of paint, coatings and metallic layers on steel and non-ferrous substrates by magnetic and eddy-current methods.

  • Industry

    Rheology for Coatings and Inks: A Practical Primer

    A single viscosity number cannot tell you whether a paint will sag, whether an ink will transfer cleanly or whether pigment will settle in storage. We explain how shear rate, thixotropy, yield stress and oscillatory tests translate into formulation decisions.

    October 20, 20265 min read

Request this service

Describe your sample and the decision it supports. We reply with a technical proposal.

Request analysis