Testing
Electrochemical Corrosion and Battery Testing
Potentiostat/galvanostat testing including polarisation, EIS, cyclic voltammetry and charge–discharge cycling for corrosion rate, coating and electrode evaluation.
In short
Potentiostat/galvanostat testing including polarisation, EIS, cyclic voltammetry and charge–discharge cycling for corrosion rate, coating and electrode evaluation. Electrochemical corrosion and battery testing is performed on a Corrtest CS310X potentiostat/galvanostat and a multichannel Metrohm Multi Autolab M204. Typical questions include ranking alloys and coatings by corrosion resistance, inhibitor dosage and comparing electrode formulations.
Electrochemical corrosion and battery testing is performed on a Corrtest CS310X potentiostat/galvanostat and a multichannel Metrohm Multi Autolab M204. Corrosion studies use open-circuit potential, Tafel polarisation for corrosion current density and rate, linear polarisation resistance and electrochemical impedance spectroscopy (EIS) to evaluate coating barriers and inhibitor efficiency, following ASTM G59, G61 and G102. Energy storage work uses cyclic voltammetry, galvanostatic charge–discharge, rate capability and cycle life tests to track electrode capacity, coulombic efficiency and impedance, with parallel cells on the multichannel system. Typical questions include ranking alloys and coatings by corrosion resistance, inhibitor dosage and comparing electrode formulations. It serves metal finishing, automotive, oil and gas, energy storage and nanomaterial organisations.
What you receive
OCP, Tafel and LPR plots with tables of Ecorr, icorr, corrosion rate (mm/year) and polarisation resistance
EIS Nyquist/Bode plots and equivalent circuit fitting parameters
CV, charge–discharge curves, specific capacity, coulombic efficiency and cycling stability plots (battery tests)
Method summary covering electrolyte, cell configuration, scan rate and test temperature
Raw data (CSV/TXT) and PDF report
How it works
Request and scoping
Test objective (corrosion, coating, electrode), electrolyte, cell type, techniques to be applied and standard references are agreed with you.
Sample reception and preparation
Samples are logged; the working electrode area is defined, surfaces are prepared or electrodes/cells assembled, and the electrolyte is prepared.
Measurement
After OCP stabilisation, the selected electrochemical techniques are run with defined parameters; long-term cycling is carried out on the multichannel system.
Reporting
Results are presented in the standard analysis report; supporting technical documentation is shared on request.
Pricing
€145
per sample
| 1+ | €145 |
| 10+ | €123 |
Lead time 5–10 business days
Final pricing depends on sample count, preparation and reporting scope. You receive an itemised proposal.
Prices are a guide and may change with any additional requests. Our team will contact you to confirm the scope and the final price.Request this service
Describe your sample and the decision it supports. We reply with a technical proposal.
Request analysisInstruments used
- Potentiostat
- Corrtest CS310X
- 4-Channel Potentiostat
- Metrohm Multi Autolab M204
Questions
Frequently asked questions
How do I send samples for Electrochemical Corrosion and Battery Testing?
Fill in the analysis request form. Our team replies with preparation and shipping instructions for your sample type, and we confirm together that the sample is suitable before you send it.
How long does Electrochemical Corrosion and Battery Testing take?
It depends on the number of samples and laboratory workload. The estimated time on this page is a reference; once we review your request we share a firm schedule.
How is the price set?
The price on this page is a list price. It may change with the number of samples and any additional requests; after we agree the scope, the final price is shared in a proposal.
How do I receive the results?
Results are delivered as a written report. You can follow the status of your request in your account and through email notifications.
Can I request this from abroad?
Yes. We accept requests in Turkish, English, Arabic and Persian, and reply in the language you prefer.
Can I see your quality documents?
We develop our quality processes with reference to ISO/IEC 17025. For the current documents and scope details, contact us and we will send them in writing.
Instruments used
Electrochemistry and electrical
Corrtest CS310X Electrochemical Workstation (Potentiostat / Galvanostat)
Single-channel electrochemical workstation for voltammetry, polarisation and impedance spectroscopy (EIS) in corrosion, battery and electrocatalysis studies.
Electrochemistry and electrical
Metrohm Multi Autolab M204 Multichannel Potentiostat / Galvanostat
Modular multichannel system for simultaneous, independent testing of several cells in battery, supercapacitor, corrosion and electrocatalysis experiments.
Related services
Testing
Salt Spray Corrosion Testing
Accelerated corrosion resistance evaluation of coatings, paints and metal surfaces by neutral salt spray testing according to ISO 9227 and ASTM B117.
Testing
Electrical Sheet Resistance Testing
Four-point probe measurement of sheet resistance, resistivity and conductivity of thin films, conductive coatings and semiconductor wafers.
Consulting
Failure Analysis and Materials Consulting
Root-cause determination of fracture, corrosion, coating delamination and product performance problems by multi-technique characterisation and expert review.
Consulting
Method Development and Validation Consulting
Consulting for designing, optimising, validating and documenting analytical test methods specific to your product and process in line with ISO/IEC 17025.
Further reading
Testing
Salt Spray Testing: What the Hours Really Mean
"500 hours of salt spray" does not mean a product will last five years. We explain what ISO 9227 and ASTM B117 tests actually measure, what they do not, and how to write a test specification that produces a meaningful answer.
October 13, 20265 min read
Request this service
Describe your sample and the decision it supports. We reply with a technical proposal.